Latest & New Sun Plus Loader For All 1506 Board Receiver

Hello friends, how are you, how are you, I hope you are well. May Allah bless you and all of us.

Well, one of the latest software updates that I’m going to paste is the loader’s firmware, which is 1506 receivers with keyboards, and can be programmed through a computer.
If there is any dead receiver or if you want to change any software, you can use it. It is the easiest way and there is no difficulty. It is very easy.

The first way is to connect one end of the RS232 cable to the back of the receiver and the other end to the 101 port on the back of your PC. Have to put it on

When the cable is connected, after that you have to directly open Sun Plus Loader. When it opens, after that the settings are easy. First of all, you have to select your task. By going to the device manager of your computer, you have to check from there what is your version. If you are using Windows Update, it will automatically pick up the version, then you will not have a problem.

If you are using old windows on the system, then after you see the task and select the task, next to it, there will be an option to select your file.

If you have done two tasks, the third task is that you have to keep the DDR2 type which is 4 MB if your receiver is 4 MB. After starting the DDR2 file, it will automatically fetch the data and tell you that everything you have is fine.

It will start burning automatically, it will start from one percent and go up to 100. When it reaches 100, it will automatically reset and turn the receiver on automatically.

If you go to the server, then your new software will be installed on your receiver, so you can install the software on your receiver.

I hope this video will be beneficial for you people and remember it in your prayers till then

Part No.01

How to Edit Sun Plus Loader and Change Name || How to Modify Sun Plus Loader & Change Name || Part 1